Product ID:MINOLTA SP101
MSDS Date:06/15/1993
FSC:6850
NIIN:00N055136
MSDS Number: BWDCS

ASPEN IMAGING INTERNATIONAL INC

555 ASPEN RIDGE DR
LAFAYETTE, CO 80026-9300
US

Emergency Phone: 800-955-5555

Info Phone: 303-666-5750

Cage: 65521

ASPEN IMAGING INTL INC

LAFAYETTE, CO 80027-5000 US

Telephone: 800-955-5555

Cage: 65521

STYRENE ACRYLATE COPOLYMER; (STYRENE/ACRYLIC COPOLYMER

CAS: 25153-46-2

IRON OXIDE

CAS: 1317-61-9

OSHA PEL 10 MG/M3

ACGIH TLV: 5 MG/M3

IRON (III) OXIDE; (IRON OXIDE)

CAS: 1309-37-1

RTECS: NO7400000

OSHA PEL 10 MG/M3 (FE)

ACGIH TLV: 5MG(FE)/M3

PROPENE POLYMERS; (POLYOLEFIN)

CAS: 9003-07-4

RTECS: UD1842000

CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3; 9394

DYE; (METAL COMPLEX DYE)

CAS: 31714-55-3

SILICA GEL; (AMORPHOUS SILICA)

CAS: 112945-52-5

RTECS: VV7310000

OSHA PEL 6 MG/M3

ACGIH TLV: 10 MG/M3

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL:ACUTE:EXPOS UNDER NON-DUSTY
CNDTNS SHOULD NOT CAUSE ANY SIGNIFICANT HLTH EFT. UNDER DUSTY
CNDTNS, IRRIT MAY OCCUR W/SOME ACCUM OF TONER DUST IN NOSE &
THROAT. CHRONIC:RPTD EXPOS UNDER NON-DUSTY CNDTNS SHOULD NOT CAUSE
A SIGNIFICANT HLTH HAZ. RPTD INHAL OF HIGH CONC OF TONER HAS CAUSED
LUNG EFTS (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:& DMG IN LAB ANIMALS. BASED ON THESE
STUDIES, EXCESSIVELY DUSTY CNDTNS SHOULD BE AVOIDED. SKIN:THIS PROD
SHOULD NOT BE A SIGNIFICANT HAZ FROM DERM EXPOS. EYE:TONER DUST MAY
CAUSE A CONJUNCT I RRIT BUT NO CHEM IRRIT OR DMG TO EYE ORITS
PARTS. INGEST: ACCIDENTAL INGEST MAY CAUSE NAUS. THERE ARE NO
KNOWN/(SUP DAT
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INGEST:CALL MD IMMEDIATELY . INHAL: REMOVE TO FRESH AIR.
SUPPORT BREATHING (GIVE O2/ARTF RESP) . EYES: IMMEDIATELY FLUSH
WITH LARGE AMOUNTS OF WATER FOR AT LEAST 15 MINUTES, OCCASIONALLY L
IFTING THE UPPER AND LOWER EYELIDS. IF EYE IRRITATION DEVELOPS,
SEEK MEDICAL ATTENTION. SKIN: NOT A SKIN IRRITANT. WASH WITH SOAP
AND WATER TO REMOVE.

Extinguishing Media:WATER FOG, FOAM, DRY CHEMICAL, CO2.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . AVOID INHALATION OF SMOKE. COOL FIRE EXPOSED
CONTAINERS WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:AS WITH ALL COMBUSTIBLE MATERIALS IN A
FINELY DIVIDED STATE, EXTREMELY HIGH CONCS IN THE AIR MAY CREATE AN
EXPLOSIVE MIXTURE. ELIMINATE SOURCES OF IGNITION.

Spill Release Procedures:LOOSE TONER MAY BE VACUUMED OR SWEPT. RESIDUE
MAY BE REMOVED WITH SOAP AND WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:AVOID REPEATED OR PROLONGED
INHALATIONS OF EXCESSIVE DUST. DO NOT TAKE INTERNALLY. AVOID
CONTACT WITH SKIN, EYES, AND CLOTHING.
Other Precautions:STORE IN A COOL, DRY, WELL-VENTILATED AREA. DO NOT
INCINERATE.

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN . NONE REQUIRED WHEN USED AS INTENDED IN
PRINTER EQUIPMENT.
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:NONE REQ WHEN USED AS INTENDED (SUPDAT)
Eye Protection:NONE REQ WHEN USED AS INTENDED (SUPDAT)
Other Protective Equipment:FOR USE OTHER THAN NORM OFC PRINTER,
OPERATING PROCEDURES (SUCH AS IN BULK TONER PROCESSING FACILITY)
EYE PROT (SUP DAT)
Work Hygienic Practices:WASH WITH SOAP AND WATER.
Supplemental Safety and Health
EFTS OF OVEREXP:REPORTED EFTS FROM REPEATED INGESTION OF THIS PRODUCT.
PROT GLOVES:IN PRINTER EQUIPMENT. EYE PROT:IN PRINTER EQUIPMENT.
OTHER PROT EQUIP:AND NIOSH/MSHA APPROVED RESPIRATORS MAY BE REQU
IRED IF UNDER DUSTY CONDITIONS.

HCC:N1
Spec Gravity:1.3-1.5
Solubility in Water:INSOLUBLE
Appearance and Odor:BLACK POWDER, FAINT ODOR.

Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:ABNORMALLY HIGH AIRBORNE CONCS OF DUST CAN
PRESENT THE POSSIBILITY OF AN EXPLOSION IF AN IGNITION SOURCE IS
PRESENT.
Hazardous Decomposition Products:CARBON MONOXIDE AND CARBON DIOXIDE.

Waste Disposal Methods:REMOVE TO AN APPROVED LANDFILLE SITE AND DISPOSE
OF IN ACCORDANCE WITH FEDERAL, STATE, AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.